ELECTRICAL
REFLECTORS/SIDE MARKER LAMP ASSEMBLY
AND BULB
UNDER BONNET LAMP ASSEMBLY
Service repair no - 86.45.24
Remove
Service repair no - 86.40.67
Remove
1.
Disconnect battery negative lead.
1.
2.
3.
Remove four screws securing lens.
Remove lens.
Remove bulb.
2. Remove two securing screws.
3. Remove lamp glass.
4. Pull ’wedge’ type bulb from bulb holder.
5.
Disconnect electrical leads located below bonnet
lamp switch attached to inner fender.
NOTE: To remove rubber seal completely
it is necessary to remove tail light lens.
6. Pull rubber grommet off leads and pull lamp and
leads up through hood stiffener channel.
Refit
4.
Refit
Reverse removal procedure.
7.
Reverse removal procedure. 1 to 6.
NOTE: A piece of bent wire will be needed
to pull electrical leads out of channel exit
hole when fitting a new lamp assembly.
REPAIR
11
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)