76
CHASSIS AND BODY
REAR QUARTER LIGHT GLASS
Service repair no - 76.81.25
Remove
1.
2.
Remove and discard moulding from flange
around opening.
Clean area where moulding contacts body.
9.
10.
Remove waist rail seal from top of door panel.
Remove bolt, spring and plain washers which
secures bottom of door frame.
11.
12.
Remove bolt, spring and plain washer from door
frame, as shown.
Remove two bolts, spring and plain washers
from both door faces.
Refit
13.
14.
Remove door frame with glass in position.
Remove tape and slide glass out of door frame.
3.
4.
Fit new moulding to glass.
Fit a draw cord around moulding retaining
channel.
Coat flange around opening with liquid soap to
aid assembly.
Hold glass and moulding to opening. Site draw
cords inside vehicle.
With assistance push glass and moulding into
opening. Pull draw cords enabling seal to ride
over flange.
Refit
15.
5.
6.
7.
Reverse removal procedure. When fitting door
frame align to suit door opening. Then tighten
door frame securing bolts.
8.
9.
Ensure interior trim fits under moulding.
Ensure moulding is settled and contacts body.
32
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)