76
CHASSIS AND BODY
CAUTION: Lay glass on felt covered
supports, do not stand on edge. Any
chipping of glass edge may develop into
cracks.
21.
22.
Align header finisher on top edge of glass, push
flange fully onto glass and use a wooden block
and mallet to ensure fit.
Carefully align each side finisher on edge of
glass, push flange fully onto glass and use a
wooden block and mallet to ensure fit.
24.
Ensure body flanges and surfaces covered by
the finishers are clean
23.
Using a cotton bud, apply glass cleaning solvent
(yellow cap) to inside face of glass, 20mm strip
around inside of finishers and 30mm wide along
bottom edge. Immediately wipe off solvent with a
clean cloth.
25.
26.
Shake the primer container for at least 30
seconds.
Using a cotton bud, apply Glass Primer (green
cap) to inside face of glass, 20mm strip around
inside of finishers and 30mm wide along bottom
edge. This must be touch dry before applying
adhesive.
CAUTION: Do not touch cleaned or primed
surfaces with fingers.
74
REPAIR
ADD: 09/95
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)