CHASSIS AND BODY
FRONT SEAT ELECTRICAL
Service repair no - 76.77.01
Remove
5. Remove two screws at front of each slide
channel.
6. Move seat to most forward position.
7.
Remove four screws at rear of each slide
channel.
8.
Disconnect battery negative lead.
1.
2.
Remove screw securing seat side trim panel and
remove panel.
Remove three screws from seat front trim panel.
Remove screw from top of trim panel to seat
base, located below seat base cushion. Remove
panel.
9. Disconnect all electrical multiplugs to seat
electrics.
10. Remove seat.
Refit
3.
4.
Remove three fixings securing cushion side trim
panel. Remove panel. Remove bolt securing
seat belt.
Move seat to rearward position. If seat will not
move. See ELECTRICAL, Repair, Electrical
Seat Failure
11. Reverse removal procedure. Arrange electrical
leads so they can not become trapped by seat
slide mechanism.
REPAIR
33
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)