BORG WARNER
DISMANTLE, INSPECTION AND OVERHAUL
Rear cover main case - Dismantle and inspection
1.
2.
Remove the circlip retaining the bearing in the
rear cover.
Drive or press the bearing from the cover and
discard the bearing.
10.
Remove the snap ring retaining the needle roller
bearing, withdraw the bearing and discard.
3.
4.
5.
6.
Remove any previous sealant evident on the
rear cover joint faces.
Using a suitable solvent thoroughly clean the
cover.
Examine the cover for damage, cracks and
porosity, renew if necessary.
Check the selector lever shaft bore, for ovality
and wear. If worn renew the cover.
Rear cover main case - Assemble
7.
8.
Drive or press a new bearing into the cover and
secure in position with the circlip.
Place the cover aside until the gearbox is ready
to be assembled.
11.
12.
13.
14.
Remove any previous sealant from the joint
faces of the front cover.
Thoroughly clean the cover using a suitable
solvent.
Examine the cover for damage, cracks and
porosity, renew if necessary.
Check the inside edges of the case for witness
marks which may indicate a chain that has
stretched.
Front cover main case - Dismantle and inspection
9.
Prise the input shaft oil seal from the front cover
and discard the oil seal.
OVERHAUL
7
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)