70
BRAKES
SENSORS - FRONT
Refit
Service repair no - 70.65.32
7. Insert new sensor bush and seal.
8.
Refit brake jump hose bracket, coat bolts with
Loctite 270.
CAUTION: If a sensor is removed for any
reason, a NEW sensor bush and seal must
be fitted.
9. Lightly coat new sensor using EP 90 oil. Push
sensor through bush until it contacts exciter ring.
Rotate wheel, turning steering from lock to lock
to set sensor air gap.
Remove
10.
Secure sensor lead in original position.
11. Reconnect sensor electrical connection.
12. Clear error code. See Fault diagnosis, Fault
Diagnosis Procedure
13. Drive vehicle to ensure ABS warning light is
extinguished.
1.
2.
Disconnect battery negative lead.
Disconnect required sensor electrical
connection, located on inner wing panel adjacent
to decker panel.
Remove sensor lead and pad wear harness plug
from clips.
3.
4.
Clean area surrounding sensor to prevent
ingress of dirt. Using a suitable lever pry sensor
from mounting bush.
5.
6.
Release harness cable ties, remove sensor lead
from vehicle.
Remove top swivel retaining bolts complete with
brake jump hose and sensor seal. Remove
sensor bush.
8
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)