ENGINE TUNING DATA
ENGINE - 300Tdi
ENGINE
Type................................................................................. 2.5 Litre Turbo diesel with intercooler
Firing order ....................................................................... 1-3-4-2
Injection timing ................................................................. 1,54 mm lift at T.D.C.
-
with electronic EGR .............................................. 1,40 mm lift at T.D.C.
Timing marks:
Valve timing - manual.............................................. Slot for pin in flywheel and TDC mark on front pulley
Valve timing - automatic .......................................... Slot for pin in ring gear, access through rear engine
plate. TDC mark on front pulley
Injection timing............................................................... Dial gauge inserted into pump
Tappet clearances - inlet and exhaust ............................. 0,20 mm cold
Valve timing:
Inlet
Exhaust
51°BBDC
13°ATDC
109°BTDC
9.97 mm
-
-
-
-
Opens ................................................................... 16°B.T.D.C.
Closes ................................................................... 42°ABDC
Peak ...................................................................... 103°ATDC
Lift ......................................................................... 9,67 mm
Maximum governed speeds:
-
-
-
-
Full load (speed cut-off starts) .............................. 4000 rev/min
No load (flight speed) ............................................ 4600 + 40 - 120 rev/min
Idle speed ............................................................. 720 ± 20 rev/min
Die-down time ....................................................... 4 seconds
INJECTION PUMP
Make/type:
-
Standard ............................................................... Bosch rotary R509 type with boost control and two
speed mechanical governor with auto advance and
solenoid electrical shut-off. Tamper proof sealing on
flight speed and fuel adjustment screws. Constant
volume delivery valves.
-
with Electronic EGR .............................................. Bosch rotary R509/1 type with boost control and two
speed mechanical governor with auto advance and
solenoid electrical shut-off. Tamper proof sealing on
flight speed and fuel adjustment screws. Constant
volume delivery valves. GST start up excess fuel
control. Throttle position sensor for EGR.
Direction of rotation .......................................................... Clockwise, viewed from drive end
Advance box (two stage).................................................. 7°advance with 3°start retard
Back leakage rate 150-100 Atmospheres:
-
-
New nozzle ........................................................... 7 seconds
Original nozzle ...................................................... 5 seconds
INFORMATION
5
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)