1995 Land Rover Range Rover Classic Workshop Manual

80
HEATING AND VENTILATION
8.
Disconnect 4 multiplugs and position harness
aside.
CONTROL CABLES
Service repair no - 80.10.06 - Air flow
NOTE: Do not carry out further
dismantling if component is removed for
access only.
Service repair no - 80.10.25 - Temperature control
RH
Service repair no - 80.10.26 - Temperature control
LH
9.
Fan speed switch: remove fan speed switch
slide and push out fan speed switch.
Pull out light bulb disconnect terminals and
remove fan speed light strip.
Remove
10.
1.  Release fascia centre louvre vent panel from its
fitted position to gain access to rear of panel.
See CHASSIS AND BODY, Repair,  Dash
Panel Central Louvre Panel
2.  Open glove box, manoeuvre side springs
through cut-outs and lower lid.
11.
12.
13.
Unclip 3 heater control cables from control unit.
Microswitch: Unclip 3 micro switches.
Cut cable tie and release wiring harness from
control unit.
14.
Refit
15.
Remove heater control unit.
Reverse removal procedure. Check the
satisfactory function of the controls before fitting
louvre vent panel.
2
REPAIR
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field