57
STEERING
TRACK ROD AND LINKAGE
Service repair no - 57.55.09
Remove track rod
Refit linkage
8. Fit replacement parts. Loosely fit clamp pinch
bolts.
9. Screw in ball joint to full extent of threads.
10.
11.
12.
Set adjuster to track rod distance to 9mm as
shown.
1.
Site vehicle on a ramp [hoist].
Set adjuster end ball joint distance to 28.5mm as
shown.
Track rod effective length of 1230.0mm is
subject to adjustment during wheel alignment
check.
Refit track rod
CAUTION: Fit a new track rod if existing is
damaged or bent. No attempt should be
made to repair it.
13.
14.
Fit track rod and tighten ball joint nuts to 40 Nm.
Check front wheel alignment. See Adjustment,
Front Wheel Alignment
15.
16.
Connect steering damper to track rod.
Remove vehicle from hoist, or axle stands.
2.
3.
Disconnect steering damper at track rod.
Disconnect track rod at ball joints, using
extractor LRT-57-018.
4.
Remove track rod.
Remove linkage
5.
6.
7.
Loosen clamp bolts.
Unscrew ball joints.
Unscrew track rod adjuster. (left hand thread).
18
REPAIR
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)