1995 Land Rover Range Rover Classic Workshop Manual

Tdi
TURBOCHARGER OIL FEED PIPE
Service repair no - 19.42.14
Remove
TURBOCHARGER OIL DRAIN PIPE
Service repair no - 19.42.12
Remove
1.
2.
Disconnect battery negative lead.
1.  Disconnect battery negative lead.
2.  Remove exhaust front pipe.  See MANIFOLD
AND EXHAUST SYSTEM, Repair,  Manifold
and Exhaust System - Tdi
Remove exhaust front pipe.  See MANIFOLD
AND EXHAUST SYSTEM, Repair,  Manifold
and Exhaust System - Tdi
3.
4.
Remove banjo bolt securing oil feed pipe to
turbocharger, discard 2 sealing washers.
Unscrew union, disconnect oil feed pipe from
cylinder block.
3.
4.
Unscrew union and disconnect oil drain pipe
from cylinder lock.
Remove 2 bolts securing oil drain pipe to
turbocharger.
CAUTION: Plug the connections.
5.
Move oil feed pipe from behind turbocharger and
remove.
5.  Remove oil drain pipe, remove and discard
gasket.
Refit
6.
CAUTION: Plug the connection.
Reverse removal procedure. use new sealing
washers.
Tighten banjo bolt to 20 Nm.
Check/top-up engine oil level.
Refit
7.
8.
6.
Ensure mating surfaces of oil pipe, turbocharger
and engine block are clean.
7.
8.
Reverse removal procedure. Use a new gasket.
Tighten oil drain pipe to turbocharger bolts to 25
Nm.
9.
Check/top-up engine oil level.
REPAIR
3
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field