1995 Land Rover Range Rover Classic Workshop Manual

REAR AXLE AND FINAL DRIVE
REAR AXLE
10.  Disconnect pivot bracket ball joint at axle
bracket.
Service repair no - 51.25.01
Remove
11.  Release bolts and remove coil spring retaining
plates.
12.  Lower axle and remove road springs.
13.
Disconnect anti-roll[sway] bar links to axle.  See
REAR SUSPENSION, Repair,  Anti-Roll[Sway]
Bar Ball Joint Links
WARNING: Remove and refit of axle
requires a further two persons to steady
the axle when lowering or repositioning
14.  Remove axle assembly.
axle.
Refit
1.
2.
3.
4.
5.
Drain brake system.
Support chassis rear.
Remove road wheels.
Support axle weight with hydraulic jack.
Disconnect ABS wiring harness multi-plug at
jump hose bracket, if applicable.
Disconnect shock absorbers.
Disconnect flexible brake hose at connection
under floor.
15.  Position axle and fit lower links.  Tighten to 176
Nm
16.  Reverse removal procedure.
17.  Tighten pivot bracket ball joint to axle to 176 Nm.
18.  Tighten propeller shaft to differential drive flange
to 47 Nm
6.
7.
19.  Bleed brake system.  See BRAKES, Repair,
Brake System Bleed
8.
9.
Disconnect lower links at axle.
Mark differential and propeller shaft flanges with
identification marks for assembly. Remove four
nuts and bolts. Lower propeller shaft and tie to
one side.
REPAIR
1
Product Specification
CategoriesLand Rover, Range Rover
Tags
Model Year1995
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 767 pages
Document TypeOwners Manual
LanguageEnglish
Product NameRange Rover Classic
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field