V8i
EXPANSION TANK
Service repair no - 26.15.01
Remove
VISCOUS COUPLING, FAN BLADES, PULLEY AND
FAN COWL
Service repair no - 26.25.03/05
Viscous coupling - remove 1 to 3
Fan blades - remove 1 to 3
Fan cowl - remove 1 to 2
Fan pulley - remove 1 to 5
Remove
WARNING: Do not remove expansion tank
filler cap when engine is hot. The cooling
system is pressurised and personal
scalding could result.
1.
Remove expansion tank filler cap by first turning
it slowly anti-clockwise, pause to allow pressure
to escape. Continue turning in same direction
and lift off.
2.
3.
Disconnect two hoses from bottom of expansion
tank, allowing coolant to drain into a suitable
container.
Remove three fixing bolts, remove expansion
tank.
WARNING: Disconnect battery negative
terminal to prevent engine being started
before removing or adjusting drive belts.
1. Loosen nut securing viscous coupling/fan blade
assembly to water pump, and place into bottom
of fan cowl.
NOTE: Nut securing viscous unit to water
pump has a right hand thread. Release by
turning anti-clockwise when viewed from
front of viscous unit.
2.
Remove two fan cowl clips, lift cowl out of lower
mountings complete with fan blade assembly.
Refit
4.
5.
6.
Reverse removal procedure.
Replenish cooling system.
Check for leaks around all hose connections.
3.
Remove fan blades from viscous coupling, if
necessary.
4.
5.
Remove serpentine drive belt.
Remove pulley fixings, remove pulley.
REPAIR
1
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)