MAINTENANCE
VEHICLE EXTERIOR
INSPECT BRAKE PADS FOR WEAR, CALIPERS
FOR LEAKS AND CONDITION
CHECK/ADJUST HEADLAMP ALIGNMENT
Check/adjust headlamp and auxiliary alignment.
Check thickness of brake pads, fit new pads if
minimum thickness is less than 3,0mm. Check brake
pads for oil contamination. If new brake pads required.
See BRAKES, Repair, Front Brake Pads
or See BRAKES, Repair, Rear Brake Pads
WARNING: When renewing brake pads, it
is essential that only genuine components
with correct grade of lining are used.
Always fit new pads as complete axle sets, NEVER
individually or as a single wheel set. Serious
consequences could result from out of balance
braking due to mixing of linings.
CHECK HEADLAMP LEVELLING SYSTEM
Check system for correct operation.
CHECK FRONT WHEEL ALIGNMENT
Refit road wheels
Use recognised wheel alignment equipment to
perform this check and adjustment. See STEERING,
Adjustment, Front Wheel Alignment
Fit road wheels in original hub position. Secure in
position with wheel nuts, do not fully tighten wheel
nuts at this stage, lower vehicle and finally tighten
wheel nuts to correct torque.
Alloy wheels: 130 Nm.
Steel wheels: 130 Nm.
REMOVE WHEELS, CHECK TYRES
Check tyres (including spare) for compliance with
manufacturers’ specification.
Check visually for cuts, lumps, bulges, uneven tread
wear and tread depth. Check road wheels for
damage.
CHECK SECURITY OF SPARE WHEEL
Check/adjust tyre pressures.
CHECK OPERATION OF DOORS, BONNET
[HOOD] AND TAILGATE LOCKS
LUBRICATE ALL HINGES, DOOR CHECK
MECHANISMS, BONNET [HOOD] CATCHES AND
FUEL FILLER FLAP
MAINTENANCE
3
| Categories | Land Rover, Range Rover |
|---|---|
| Tags | Land Rover |
| Model Year | 1995 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Name | Range Rover Classic |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)