19
FUEL SYSTEM
FUEL LIFT PUMP
Service repair no - 19.45.09
Remove
FUEL SEDIMENTOR
Service repair no - 19.25.01
Remove
NOTE: Blank off pipe ends and
1. Disconnect battery.
connections to prevent ingress of dirt.
1.
2.
Disconnect battery.
Remove high pressure fuel pipes, injection pump
to injectors.
2.
3.
4.
Disconnect inlet and outlet fuel pipes from
sedimentor.
Slacken drain tap and allow sedimentor to
completely drain.
Remove 2 bolts, washers and nuts and detach
sedimentor from chassis mounting bracket.
3.
4.
Disconnect fuel inlet and outlet pipes from lift
pump.
Remove 2 bolts and withdraw lift pump and
gasket from cylinder block.
Refit
5.
Secure sedimentor to chassis mounting with
fixing bolts.
Refit
6.
Reconnect inlet and outlet fuel pipes to
sedimentor.
5.
6.
Clean mating faces of pump and cylinder block.
Fit lift pump to cylinder block with a new gasket,
ensure correct location of operating lever with
camshaft.
Secure with bolts. Tighten to 25 Nm (18 lbf/ft).
Connect inlet and outlet pipes using new nuts
and olives.
7. Slacken drain plug until diesel free from air
flows, then retighten plug.
8. Prime vehicle fuel system. See Adjustment,
Priming the fuel system
7.
8.
9. Reconnect battery.
9.
Refit injector pipes. Tighten union nuts to 28 Nm
(21
lbf/ft).
4
REPAIR
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)