1996 Land Rover Defender Worshop Manual 300 Tdi

19
FUEL SYSTEM
REAR MOUNTED FUEL TANK - 110/130
Service repair no - 19.55.26
WARNING: Before any attempt is made to
start the removal procedure it is vital that
the FUEL HANDLING PRECAUTIONS See
INTRODUCTION, Information,  FUEL HANDLING
PRECAUTIONS are carefully studied and
implemented in the interests of safety.
5.  Disconnect breather hose from filler tube.
6.  Disconnect electrical plug and fuel supply pipe
from outlet pipe union on fuel gauge unit.
7.  If the vehicle is fitted with a tow ball drop-plate
with support bars, the bars must be removed.
8.  Remove anti-roll bar chassis mountings. See
REAR SUSPENSION, Repair, Anti-roll bar
and push roll bar down to provide access to the
tank.
Remove
1.
2.
3.
Disconnect battery.
Remove fuel filler cap.
Remove tank drain plug, allow fuel to drain into a
clean container, and refit plug.
Slacken retaining clips and disconnect fuel filler
hose from rear tank.
9.  Remove LH lashing eye to assist access to tank.
10.  Position a support under the tank, preferably one
that can be progressively lowered.
4.
8
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field