1996 Land Rover Defender Worshop Manual 300 Tdi

76
CHASSIS AND BODY
REAR SEAT BELTS - 90/110 STATION WAGON,
INWARD FACING SEATS
REAR SEAT BELTS - 110
Service repair no - 76.73.18
Remove
Service repair no - 76.73.18
Remove
1.
2.
Remove rear inward facing seats See  Rear
seat squab - 90 or See  Rear bench seat .
Remove side trim panel See  Side trim panel .
1.
2.
Release belt straps from buckles.
Release stowage straps and lower both seat
cushions.
3.
4.
Unscrew bolt securing lap strap to body
mounting.
Remove lap strap, wavy washer, spacer and
plain washer.
3.
4.
Remove bolt securing seat belt inertia reel to ā€™Cā€™
post.
Remove seat belt assembly.
5.
Repeat operation for buckle strap.
Refit
6.
Secure lap strap and buckle straps to body.
Tighten bolts to 32 Nm (24 lbf/ft).
If required, secure seat cushions and belts in
stowed position.
7.
5.
6.
7.
Pull seat belt straps between seat cushion and
squab into rear of vehicle.
Remove finisher cap and bolt securing seat belt
anchorage to floor.
Remove seat belt assembly.
20
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field