AIR CONDITIONING
COMPRESSOR
Refit
Service repair no - 82.10.20
Remove
9. If a new compressor is to be fitted first drain oil
from new compressor. Drain and measure oil
from old compressor. Measure new oil equal to
amount from old compressor, add 30 ml extra to
this amount and refill new compressor through
outlet port.
10. Locate compressor over mounting bracket studs.
11. Reconnect compressor clutch harness
multi-plug.
1.
2.
Disconnect battery.
Recover refrigerant from air conditioning system
See Adjustment, Refrigerant recovery,
recycling, recharging.
3.
Remove compressor drive belt. See
Compressor drive belt
12. Fit new ’O’ rings to high and low pressure hose
flanges, lubricate with refrigerant oil.
13.
14.
Fit high and low pressure hoses.
Fit compressor drive belt See Compressor
drive belt.
15.
Evacuate and recharge air conditioning system
See Adjustment, Refrigerant recovery,
recycling, recharging.
16.
17.
18.
Reconnect battery.
Perform a leak test on disturbed joints.
Carry out a functional check.
4.
5.
6.
7.
Disconnect high pressure pipe from compressor.
Disconnect low pressure pipe from compressor.
Remove ’O’ ring from each flange.
Disconnect compressor clutch harness
multi-plug.
8.
Remove compressor from mounting bracket
studs.
REPAIR
1
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)