1996 Land Rover Defender Worshop Manual 300 Tdi

76
CHASSIS AND BODY
SUN ROOF
4.  Remove sun roof.
5.
6.
7.
Starting from centre rear, peel headlining finisher
from inner frame.
Remove 18 screws securing inner frame to outer
frame and detach inner frame.
Service repair no - 76.83.01
Remove
Lift outer frame from roof.
1.
2.
Open sun roof fully.
Disengage spring lock from operating handle
catch.
NOTE: Assistance may be required to
remove the sun roof assembly.
3.
Holding sun roof at both sides, release hinges
from locating brackets at front of outer frame.
Refit
12.  Starting from centre rear, fit headlining finisher
lip into locating channel of inner frame.
8.
9.
10.
Clean roof area around outer frame seating.
Position outer frame on roof.
13.  Press finisher firmly over inner frame and
continue around complete frame, ensuring
finisher lies flat on headlining.
14.  Fit sun roof hinges fully into locating brackets on
outer frame, and lower the glass panel.
15.  Engage operating handle catch with spring lock
of outer frame and close sunroof.
Fit inner frame to headlining and secure to outer
frame with 18 screws but do not fully tighten.
Check alignment of inner and outer frames with
roof mounting and headlining, adjust as
necessary, and fully tighten fixing screws to 10
Nm (7 lbf/ft).
11.
30
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field