1996 Land Rover Defender Worshop Manual 300 Tdi

64
REAR SUSPENSION
ANTI-ROLL BAR
Service repair no - 64.35.08
Remove
Refit
1.
2.
Note for reassembly, position of rubber bushes
on anti-roll bar.
Remove 4 nuts, bolts and washers securing both
anti-roll bar bush straps to chassis mounting
brackets.
5.  Position rubber bushes on anti-roll bar. Fit joint
towards axle.
6.  Fit anti-roll bar with two straps. Ensure link arms
point down as shown. Loosely fit, bolts, washers
and new nyloc nuts.
3.
4.
Remove nuts, bolts, washers and rubber bushes
securing anti-roll bar to links.
Remove anti-roll bar.
7.  Fit bolt, washers and rubber bushes. Fit anti-roll
bar to links and tighten to 68Nm (50 lbf/ft).
8.  Tighten nuts securing straps to 30Nm (22 lbf/ft).
4
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field