ELECTRICAL
HEADLAMP LEVELLING SWITCH
Service repair no - 86.65.16
Remove
HEADLAMP LEVELLING UNIT
Service repair no - 86.41.16
Remove
1.
Remove headlamp See Headlamp.
1.
2.
Remove 2 screws and withdraw switch panel
from lower fascia.
Disconnect multi-plug from rear of headlamp
levelling switch.
Remove knob from switch spindle.
Unscrew retaining nut and withdraw switch from
switch panel.
2. Disconnect headlamp levelling unit harness
plug.
3. Rotate levelling unit anti-clockwise to release
retaining lugs from mounting bracket on
headlamp body.
4. Release levelling unit spindle from retaining slot
on headlamp bezel and withdraw unit from
mounting bracket.
3.
4.
Refit
5.
Fit switch into switch panel and secure with
retaining nut.
Refit
6.
7.
8.
Fit switch knob.
Connect switch multi-plug.
Fit switch panel.
5. Fit levelling unit into mounting bracket and locate
unit spindle into slot in headlamp bezel.
6. Press in unit and rotate clockwise to engage
retaining lugs behind mounting bracket.
7.
8.
Connect levelling unit harness plug.
Fit headlamp See Headlamp.
REPAIR
23
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)