1996 Land Rover Defender Worshop Manual 300 Tdi

12
ENGINE
OIL FILTER HEAD GASKET
Service repair no - 12.60.03
Remove
CYLINDER HEAD GASKET
Service repair no - 12.29.02
Remove
1.
2.
Clean filter head adaptor.
Disconnect oil cooler pipes and plug to prevent
ingress of dirt.
1.  Disconnect battery
2.  Remove bonnet.
3.  Drain coolant.  See COOLING SYSTEM,
Repair,  Drain and refill cooling system
3.
Disconnect oil pressure switch lead.
4.
Remove air cleaner.  See FUEL SYSTEM,
Repair,  Air cleaner
5.
Detach crankcase ventilation valve and side
breather hose from rocker cover and move to
one side.
6.
7.
Remove fuel injectors and pipes. See FUEL
SYSTEM, Repair,  Fuel injectors
Remove heater plugs.  See FUEL SYSTEM,
Repair,  Heater plugs
4.
5.
Remove 4 bolts and withdraw filter head,
complete with gasket.
Clean mating faces of filter head and cylinder
block.
6.
7.
8.
9.
Fit head with new gasket.
Tighten bolts to 45 Nm (33 lbf/ft).
Reconnect oil pressure switch lead.
Reconnect oil cooler pipes.
8.
9.
Disconnect radiator top hose from thermostat.
Disconnect bleed hose at thermostat.
10.
11.
Disconnect water pump hose at thermostat.
Disconnect water temperature sensor lead.
20
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field