CHASSIS AND BODY
Refit
8.
SIDE TRIM PANEL - 90 STATION WAGON
Service repair no - 76.13.70
Remove
Secure seat belt straps to floor mounting.
Tighten bolt to 32 Nm (24 lbf/ft) and fit finisher
cap.
9.
Feed belt straps between seat cushion and
squab.
1. Remove rear seat squabs See Rear seat
squab .
10.
Fit inertia reel to ’C’ post. Tighten bolt to 32 Nm
(24
lbf/ft).
2. Remove rear end trim panel See Rear end
trim panel .
11.
12.
Fit side trim panel See Side trim panel .
Fit rear inward facing seats See Rear seat
squab - 90 or See Rear bench seat .
3.
4.
Prise cap from front seat belt upper guide
retaining bolt.
Unscrew retaining bolt and remove seat belt
from ’B’ post.
5.
6.
Carefully prise trim stud from ’B’ post.
Remove 4 bolts securing side trim panel to body
side.
7.
8.
Release top edge of side trim panel by striking
upwards with the hand to disengage 3 spring
clips.
Lift trim panel from window surround and remove
from vehicle.
REPAIR
21
Product Specification
Categories | Land Rover, Land Rover Defender |
---|---|
Tags | Land Rover |
Model Year | 1996 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 300 Tdi |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |