1996 Land Rover Defender Worshop Manual 300 Tdi

CLUTCH
CLUTCH PEDAL
Service repair no - 33.33.02
Remove
NOTE: If new pedal pivot bushes are
required they must be reamed to 16 mm
(0.625 in).
Refit
1.
2.
Remove pedal bracket assembly and master
cylinder  See  Master cylinder .
Release return spring from clutch pedal.
7.  If removed, fit trunnion bush and trunnion to
clutch pedal. Lubricate components with general
purpose grease on assembly.
8.
Fit pedal to bracket, insert pivot shaft and secure
with new pin.
9.
Fit pedal return spring.
10.
Fit master cylinder and pedal bracket assembly
See  Master cylinder .
11.
Adjust clutch pedal and master cylinder setting
See Adjustment,  Clutch pedal and master
cylinder setting .
3.
4.
Using a suitable punch, drift out securing pin and
withdraw pedal pivot shaft.
Withdraw clutch pedal, complete with trunnion
and bush.
5.
6.
If necessary remove pivot bushes.
Examine components for wear and damage,
renew as necessary.
REPAIR
3
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field