AIR CONDITIONING
CONDENSER FAN AND MOTORS
Service repair no - 82.15.08
Remove
CONDENSER
Service repair no - 82.15.07
Remove
1.
2.
Disconnect battery.
Remove 6 screws and lift grille panel from
vehicle.
1. Disconnect battery.
2. Recover refrigerant from air conditioning system
See Adjustment, Refrigerant recovery,
recycling, recharging.
3.
Remove 6 screws and lift grille panel from
vehicle .
3.
4.
5.
Disconnect fan motor multi-plugs and release
harness retaining clips.
Remove nut and washers and withdraw fan
blade from motor drive shaft.
Remove 2 retaining screws, release motor fan
from shroud support brackets and feed motor
multi-plug lead through appropriate aperture.
4. Disconnect condenser fan motor lead
multi-plugs.
5. Disconnect receiver/drier dual pressure switch
multi-plug.
Refit
6.
7.
8.
Feed motor lead through fan shroud.
Fit motor to fan shroud support brackets.
Reconnect fan lead multi-plug and secure with
retaining clips.
9.
10.
11.
Fit fan blade to motor drive shaft.
Fit grille panel.
Reconnect battery.
6.
7.
Disconnect condenser low pressure pipe at
compressor.
Disconnect high pressure hose/pipe at
evaporator.
REPAIR
3
Product Specification
Categories | Land Rover, Land Rover Defender |
---|---|
Tags | Land Rover |
Model Year | 1996 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 300 Tdi |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |