70
BRAKES
REAR BRAKE PADS
Service repair no - 70.40.03
Service tool:
Remove
1.
2.
3.
Remove rear road wheels.
Clean exterior of calipers.
Remove pad retaining pins and anti-rattle
springs. Note differences between 90 and
110/130
models.
4.
5.
Remove brake pads.
Clean exposed parts of pistons, using new brake
fluid. Wipe away excess with a lint free cloth.
Using piston clamp LRT-70-500 press each
piston back into its bore. Ensure that displaced
brake fluid does not overflow from reservoir.
6.
90
Models
Refit
7.
8.
Insert brake pads.
Fit anti-rattle springs and secure with retaining
pins.
9.
Apply service brake pedal several times to locate
pads.
10.
Fit road wheels, remove chassis stands and
jack. Tighten wheel nuts to correct torque:
Alloy wheels - 130 Nm (96 lbf/ft)
Steel wheels - 100 Nm (80 lbf/ft)
Heavy duty wheels - 170 Nm (125 lbf/ft)
Check fluid reservoir, top up if necessary, using
correct grade of fluid See LUBRICANTS,
FLUIDS AND CAPACITIES, Information,
Recommended lubricants and fluids .
11.
110/130
Models
8
REPAIR
REV: 09/97
Product Specification
Categories | Land Rover, Land Rover Defender |
---|---|
Tags | Land Rover |
Model Year | 1996 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 300 Tdi |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |