1996 Land Rover Defender Worshop Manual 300 Tdi

ELECTRICAL
DIGITAL DIESEL SHUT-OFF VALVE (DDS)
Service repair no - 86.77.00
Remove
7.  Remove protective cap retainer and release
DDS valve clamp from behind fuel shut-off
solenoid.
Refit
1.
Remove fuel injection pump See FUEL
8.  Position DDS valve clamp behind fuel shut-off
SYSTEM, Repair,  Fuel injection pump.
solenoid and fit protective cap retainer.
9.
Fit DDS terminal lead to fuel shut-off solenoid.
Tighten nut to 2 Nm (1.5 lbf/ft).
10.
Fit protective cap to fuel shut-off solenoid,
ensuring terminal lead is correcly routed on RH
side of cap.
11.
12.
Secure DDS valve to fuel cut-off solenoid and
clamp. Tighten new shear bolts progressively
until heads shear.
Fit fuel injection pump See FUEL SYSTEM,
Repair,  Fuel injection pump.
2.
3.
Drill out 2 shear bolts securing DDS valve and
clamp, using a 3.2 mm drill, to a depth of
approximately 5 mm.
CAUTION: Use a drill bushing to guide the
drill.
Using an extractor, remove the 2 DDS valve
retaining bolts and discard.
4.
5.
6.
Release DDS valve from fuel shut-off solenoid.
Remove protective cap from shut-off solenoid.
Unscrew terminal nut, release terminal lead
eyelet and remove DDS valve.
REPAIR
25
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field