ELECTRICAL
REAR NUMBER PLATE LAMP - BULB RENEWAL
Service repair no - 86.40.85
Remove
REAR NUMBER PLATE LAMP
Service repair no - 86.40.86
Remove
1.
2.
Remove single screw securing lamp cover and
lens to bulb holder.
Remove bulb/s from holder.
1.
2.
Remove single screw and remove lamp cover
and lens.
Uncsrew 2 fixings and remove metal cover to
gain access to lamp fixings and harness leads
inside vehicle.
Refit
3.
4.
Fit new bulb/s.
Fit lamp lens and cover.
3.
4.
Disconnect lamp leads from harness.
Remove 2 bolts, nuts and washers securing
lamp to vehicle body.
5.
Remove bulb holder, complete with rubber seal
and mounting plinth.
Refit
6.
Feed lamp unit leads through vehicle body and
secure bulb holder, seal and plinth.
Fit lamp leads to harness connectors.
Fit cover to conceal lamp fixings.
Fit lens and lamp cover.
7.
8.
9.
REPAIR
15
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)