1996 Land Rover Defender Worshop Manual 300 Tdi

82
AIR CONDITIONING
COMPRESSOR DRIVE BELT
Service repair no - 82.10.02
Remove
Refit
6.  Fit compressor drive belt.
Fit drive belt guard.
7.
8.  Fit torque meter to centre of tensioner, apply and
hold a torque of 35 Nm (26 lbf/ft).
1.
2.
Disconnect battery.
Remove auxiliary drive belt See ELECTRICAL,
Repair,  Auxiliary drive belt.
9.  Tighten tensioner retaining bolts.
10.  Rotate crankshaft 2 full turns.
11.  Reapply and hold a torque of 35 Nm (26 lbf/ft)
to tensioner, then fully slacken and retighten
tensioner retaining bolts to25 Nm (18 lbf/ft).
12.
Fit auxiliary drive belt See ELECTRICAL,
Repair,  Auxiliary drive belt.
Reconnect battery.
13.
3.
Remove 3 nuts securing drive belt guard to
compressor retaining studs.
4.
5.
Slacken 3 belt tensioner retaining bolts.
Remove compressor drive belt. Mark direction
on belt if refitting.
2
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field