STEERING
STEERING COLUMN LOCK
Service repair no - 57.40.28
Remove
14. Fit steering column nacelle See Steering
column nacelle .
15. Fit instrument panel See INSTRUMENTS,
Repair, Instrument panel .
16. Fit steering wheel See Steering wheel .
17.
Reconnect battery.
1.
2.
3.
4.
Disconnect battery.
Set road wheels in straight ahead position.
Remove steering wheel See Steering wheel .
Remove instrument panel See INSTRUMENTS,
Repair, Instrument panel .
5.
Remove steering column nacelle See Steering
column nacelle .
6.
Note position of harness leads on back of starter
switch and disconnect lucars. If fitted, remove
alarm system passive coil from switch See
ELECTRICAL, Repair, Vehicle immobilisation
and alarm system .
7.
8.
Using a punch or stud extractor remove 2 shear
bolts securing steering lock/starter switch to
column.
Remove steering lock and collect 2 washers
between lock and clamp.
Refit
9.
Fit steering lock/switch in position and line up
with switch plunger.
10.
11.
Secure lock to column with clamp and new shear
bolts. Evenly tighten bolts but do not shear them.
Temporarily fit steering wheel and operate lock
and switch mechanism to ensure it functions
correctly.
12.
13.
Fully tighten retaining bolts until heads shear.
Connect harness leads to rear of starter switch.
If applicable, fit alarm system passive coil See
ELECTRICAL, Repair, Vehicle immobilisation
and alarm system .
REPAIR
9
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)