1996 Land Rover Defender Worshop Manual 300 Tdi

10
MAINTENANCE
RENEW AIR CLEANER ELEMENT AND CLEAN
DUMP VALVE
Refit
6.
Fit new element, seal first, into casing and
secure with wing nut.
Remove
7.
Fit end cover, align mating arrows, and secure
with wing nut.
1.
Release 2 retaining clips and lift air cleaner from
its cradle sufficiently to gain access to element.
8.  Position air cleaner in mounting cradle and
secure with retaining clips.
CLEAN ENGINE BREATHER FILTER
Remove
1.
2.
Disconnect breather top hose.
Remove single bolt and ease breather from
rocker cover.
2.
3.
Unscrew wing nut and remove end cover.
Unscrew second wing nut and withdraw element
from air cleaner casing.
3.
4.
Disconnect bottom hose and remove engine
breather.
Using suitable flushing solvent, thoroughly clean
breather filter. Remove and discard rubber ’O’
ring from breather pipe.
Refit
5.
6.
7.
Fit new rubber ’O’ ring to engine breather.
Connect breather bottom hose.
Locate breather into rocker cover and secure
with retaining bolt, tightening to 9 Nm (7 lbf/ft).
Connect breather top hose.
8.
4.
5.
Clean interior and exterior of casing and cover.
Squeeze open dump valve and check that
interior is clean. Renew valve, if perished.
6
MAINTENANCE
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field