1996 Land Rover Defender Worshop Manual 300 Tdi

19
FUEL SYSTEM
HEATER PLUG CONTROL UNIT
Service repair no - 19.60.33
Remove
AIR CLEANER
Service repair no - 19.10.01
Remove
1.
Disconnect battery.
1.
2.
Slacken hose clip and detach outlet hose.
Release clips and open air cleaner retaining
straps.
3.
4.
Lift up air cleaner, slacken hose clip and detach
inlet hose.
Remove air cleaner.
2.
3.
Remove screw securing control unit to bulkhead.
Disconnect multi-plug and release control unit.
Refit
Refit
5.
6.
Position air cleaner and connect inlet hose.
Close air cleaner retaining straps and secure
lock clips.
4.
5.
6.
Fit harness multi-plug to control unit.
Secure control unit to bulkhead.
Reconnect battery.
7.
Connect outlet hose.
NOTE: If an EGR fuel system is fitted,
ensure the modulator valve vacuum spill
pipe is secure in the outlet hose.
AIR CLEANER ELEMENT
Service repair no - 19.10.10
For remove and refit procedure. See SECTION 10,
Maintenance,  Under bonnet maintenance
12
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field