76
CHASSIS AND BODY
Refit
REAR UNDERTRAY
12.
13.
If applicable, fit acoustic pad to undertray.
Fit undertray in position, ensuring flanges are
correctly located in rear undertray.
Secure undertray to chassis front crossmember,
bump stops and rear undertray. Tighten fixings
to 14 Nm (10 lbf/ft).
Service repair no - 76.11.80 - Rear undertray
Service repair no - 76.11.82 - Acoustic pad
14.
15.
Remove
1. Raise vehicle on ramp.
Fit propeller shaft to front axle and tighten nuts
to 47 Nm (35 lbf/ft).
16.
17.
Raise ramp to remove chassis support.
Lower ramp.
2.
3.
4.
5.
Remove 2 bolts securing sides of undertray to
front undertray.
Remove 2 bolts securing rear undertray to
chassis crossmember brackets.
Remove bolt securing undertray to RH side of
chassis.
Pull undertray rearwards to release from flanges
of front undertray.
6.
7.
Remove rear undertray.
If necessary, remove 7 fasteners and release
acoustic pad from undertray.
Refit
8.
9.
If applicable, fit acoustic pad to undertray.
Fit undertray in position, ensuring flanges of front
undertray are correctly located.
10.
11.
Secure undertray to chassis crossmember, RH
chassis side, and front undertray. Tighten fixings
to 14 Nm (10 lbf/ft).
Lower ramp.
38
REPAIR
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)