ELECTRICAL
INSTRUMENT ILLUMINATION - BULB RENEWAL
STARTER SWITCH
Service repair no - 86.45.49 - Speedometer
Service repair no - 86.45.51 - Temperature gauge
Service repair no - 86.45.52 - Fuel gauge
Service repair no - 86.65.03
Remove
Remove
1. Remove instrument panel See INSTRUMENTS,
Repair, Instrument panel.
1.
Disconnect battery.
2. Remove steering column nacelle See
STEERING, Repair, Steering column nacelle.
3.
Note position of harness leads on back of starter
switch and disconnect lukars. If fitted, remove
alarm system passive coil from switch See
Passive coil.
4.
Remove single screw and withdraw starter
switch from steering column lock.
2.
3.
Remove 4 screws retaining instrument panel.
Ease panel forward and disconnect
speedometer cable to improve access to
illumination bulbs.
Twist bulb holder and pull from socket.
Pull bulb from holder.
Refit
5.
6.
7.
Fit new switch in steering column lock.
Connect harness leads to starter switch.
If applicable, fit alarm system passive coil See
Passive coil.
4.
5.
8.
9.
Fit steering column nacelle See STEERING,
Repair, Steering column nacelle.
Fit instrument panel See INSTRUMENTS,
Repair, Instrument panel.
Refit
6.
7.
Fit new bulb and refit holder.
Reconnect speedometer cable and fit instrument
panel.
8.
Reconnect battery.
REPAIR
19
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)