FUEL SYSTEM
EGR VALVE
EGR VALVE MODULATOR
Service repair no - 17.45.04
Remove
Service repair no - 17.45.01
Remove
1.
2.
3.
Disconnect multi-plug from EGR valve.
Disconnect vacuum pipe from EGR valve.
Remove 2 Allen screws securing EGR valve to
exhaust manifold.
Remove 2 bolts securing air inlet delivery tube to
EGR valve.
1. Disconnect multi-plug from modulator.
2. Disconnect spill pipe (green), modulator to air
cleaner hose.
3. Disconnect vacuum pipe (blue), modulator to
EGR valve.
4.
5.
4. Disconnect vacuum pipe (white), modulator to
brake servo pipe.
Remove EGR valve and discard gaskets.
5.
Unscrew 2 nuts securing modulator to flexible
mountings.
Refit
6.
6.
Remove modulator.
Clean mating faces of EGR valve and exhaust
manifold.
Refit
7.
Position new gaskets and fit EGR valve to
delivery tube and exhaust manifold. Tighten
bolts to 25 Nm (18 lbf/ft).
7. Fit modulator to flexible mountings and tighten
nuts to 8 Nm (6 lbf/ft).
8.
Fit vacuum pipe and multi-plug to EGR valve.
8. Fit modulator pipes, ensuring they are connected
to correct ports.
9.
Connect modulator multi-plug.
REPAIR
17
Product Specification
Categories | Land Rover, Land Rover Defender |
---|---|
Tags | Land Rover |
Model Year | 1996 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 300 Tdi |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |