1996 Land Rover Defender Worshop Manual 300 Tdi

64
REAR SUSPENSION
Refit
10.
Ensure ball pin threads are clean and smear
Loctite grade CVX on ball pin threads.
Fit upper ball joint to levelling unit and secure
gaiter.
11.
12.
Fit top bracket complete with levelling unit to
chassis and secure with 4 nuts and tighten to 47
Nm (35 lbf/ft).
13.
Fit levelling unit to lower ball joint and secure
gaiter.
14.
15.
Attach webbing strap to chassis cross member.
Fit upper links to the pivot bracket and retain
with 2 bolts and nuts but do not tighten at this
stage.
16.
17.
Remove jack in support of axle and support from
under chassis.
Allow suspension to settle and then tighten 2
bolts and nuts retaining upper links to pivot
bracket to 176 Nm (130 lbf/ft).
6
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field