1996 Land Rover Defender Worshop Manual 300 Tdi

12
ENGINE
Refit
OIL PRESSURE RELIEF VALVE
Service repair no - 12.60.56
Remove
8.
Fit oil pump rotors in front cover.
Apply a bead of RTV sealant around retaining
plate.
Fit oil pump retaining plate to front cover,
securely tighten screws.
9.
10.
11.
1.  Remove engine oil sump.  See Engine oil
sump
Fit front cover to cylinder block. See  Front
cover gasket
2.
3.
Unscrew relief valve retaining plug from base of
front cover.
Withdraw valve spring and plunger and check for
wear.
Valve spring free length, 68.00 mm (2.68 in).
NOTE: If the valve plunger sleeve is badly
worn, pitted or scored, a new front cover
must be fitted.  See Front cover gasket
Always renew valve spring and plunger as a pair.
Refit
4.
5.
Insert valve plunger and spring into sleeve in
front cover and secure with retaining plug.
Fit engine oil sump.  See Engine oil sump
24
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field