1996 Land Rover Defender Worshop Manual 300 Tdi

REAR AXLE AND FINAL DRIVE
REAR HUB ASSEMBLY - 110/130
Service repair no - 64.15.01
Remove
3.  Lever off dust cap.
4.
Remove circlip from driveshaft.
5.  Remove 5 bolts and withdraw driving member
and joint washer.
6.  Bend back lock washer tabs.
7.
Remove locknut and lock washer.
1.
2.
Loosen rear wheel nuts, jack up vehicle and
lower onto axle stands. Remove road wheel.
Release brake pipe clips, remove brake caliper
and brake disc shield bolts. Secure to one side.
8.  Remove hub adjusting nut.
9.  Remove spacing washer.
10.  Remove hub and brake disc assembly complete
with bearings.
WARNING: Take care not to kink brake
hose.
Hub components
1.
2.
3.
4.
5.
6.
7.
8.
Dust cap.
Drive shaft circlip.
Drive member.
Drive member joint washer.
Drive member retaining bolt.
Lock nut.
9.  Spacing washer.
10.  Outer bearing.
11.  Hub.
12.  Inner bearing.
13.  Grease seal.
14.  Brake disc
Lock washer.
Hub adjusting nut.
15.  Disc retaining bolt.
REPAIR
5
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field