1996 Land Rover Defender Worshop Manual 300 Tdi

88
INSTRUMENTS
PRINTED CIRCUIT - WARNING LIGHT PANEL
Service repair no - 88.20.20
Remove
FUEL GAUGE TANK UNIT - REAR FUEL TANK,
110/130
Service repair no - 88.25.30
WARNING: Ensure that fuel handling
precautions given in Section 01 -
Introduction are strictly adhered to when
carrying out the following instructions.
1.
Remove warning light panel See  Warning light
panel .
Remove
1.
2.
3.
Disconnect battery.
Remove fuel filler cap.
Remove tank drain plug, allow fuel to drain into a
clean container, and refit plug.
2.
3.
Remove 13 illumination bulb holders from light
panel.
Release printed circuit from locating pins and
remove from panel seatings.
Refit
4.
Fit new printed circuit over panel seatings and
position on locating pins.
5.
6.
Fit illumination bulbs to secure circuit.
Fit warning light panel See  Warning light
panel .
4.
On LH side of tank, disconnect fuel supply pipe
from outlet pipe on fuel gauge unit.
5.
6.
Disconnect electrical plug from fuel gauge unit.
Release locking ring and withdraw fuel gauge
unit from tank, complete with sealing ring.
Refit
7.
Insert gauge unit into tank with float positioned to
base of tank. Fit new sealing washer, if
necessary.
8.
9.
10.
11.
Secure gauge unit with locking ring.
Fit electrical plug and reconnect fuel supply pipe.
Refill fuel tank.
Reconnect battery.
4
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field