1996 Land Rover Defender Worshop Manual 300 Tdi

TRANSFER GEARBOX
63.
Feed transmission brake cable through heel
board. Ensure cable grommet is correctly
located.
NOTE: Apply a soap solution to aid fitment
of cable.
64.
65.
Lower vehicle ramp.
Connect cable clevis to handbrake lever and fit
handbrake gaiter.
66.
67.
Connect high/low lever to operating rod.
Fit breather pipe banjo union to high/low
cross-shaft housing.
68.
Fit cntre access panel to seat base. If fitted,
secure EGR and alarm system diagnostic
connector mounting bracket to front of access
panel.
69.
70.
If fitted, reconnect multi-plug to EGR control unit
on base of centre seat cushion or cubby box.
Fit seat cushion or cubby box See CHASSIS
AND BODY, Repair,  Cubby box .
Reconnect battery.
Check operation of handbrake and adjust as
necessary  See BRAKES, Repair, Handbrake
cable .
71.
72.
REPAIR
5
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field