FRONT SUSPENSION
SELF LOCKING NUTS
WARNING: Where self locking nuts are
removed, they must be replaced with new
nuts of same specification.
RADIUS ARM
Service repair no - 60.10.16.
Remove
1.
2.
Loosen road wheel retaining nuts.
Raise front of vehicle. Support chassis on stands
and remove wheel.
PANHARD ROD
Service repair no - 60.10.07.
Remove
1.
2.
3.
4.
Remove fixings at mounting arm.
Remove fixings at axle bracket.
Remove panhard rod.
Using a suitable length of steel tubing, press out
flexible bushes. Ensure tubing locates on outer
edge of bush and not on rubber inner.
3.
4.
Support front axle weight with jack.
Remove radius arm to chassis side member
fixings.
Refit
5.
Fit replacement bushes.
5.
Disconnect track rod at ball joint.
CAUTION: Apply pressure to outer edge of
bush, and not rubber inner.
6.
Fit panhard rod to axle bracket and mounting
arm. Tighten fixings to 88 Nm (65 lbf/ft).
REPAIR
1
Product Specification
Categories | Land Rover, Land Rover Defender |
---|---|
Tags | Land Rover |
Model Year | 1996 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 300 Tdi |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |