CHASSIS AND BODY
REAR SEAT CUSHION - 90
Service repair no - 78.10.18/99
Remove
REAR SEAT SQUAB - 90
Service repair no - 78.10.58/99
Remove
1.
Release seat cushion stowage strap and lower
seat cushion.
1.
2.
Release seat cushion stowage strap.
Remove 4 bolts and spring washers and lift seat
cushion from pivot brackets.
2. Slacken 2 bolts securing seat squab brackets to
body side.
3. Remove 2 bolts, plain washers, spring washers
and nuts securing seat squab to wheel arch.
3.
Remove 4 bolts, plain washers, spring washers
and nuts. Detach both pivot brackets from wheel
arch.
4.
Lift seat squab and release brackets from
retaining bolts.
Refit
4.
Secure pivot brackets to wheel arch and tighten
bolts to 10 Nm (7 lbf/ft).
Refit
5.
Position seat cushion in pivot brackets and
secure with 4 bolts and spring washers.
Fit stowage strap.
5. Lower seat squab brackets over retaining bolts,
tighten bolts to 10 Nm (7 lbf/ft).
6. Secure seat squab to wheel arch, tighten bolts to
6.
10
Nm (7 lbf/ft).
7.
Raise seat cushion and fit stowage strap.
REPAIR
17
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)