1996 Land Rover Defender Worshop Manual 300 Tdi

12
ENGINE
14.
15.
Disconnect engine harness multi-plug.
Remove single bolt securing transmission
breather pipe clip to cylinder head and move
breather pipes aside.
18.
19.
Remove 3 retaining nuts and disconnect exhaust
down pipe.
Disconnect inlet and outlet hoses from power
steering pump.
20.
21.
Disconnect bleed hose from thermostat housing.
Release bleed hose from retaining clips on front
timing cover plate.
16.
Disconnect multi-plug and vacuum pipe from
EGR valve, if fitted.
22.
23.
Remove split pin securing inner throttle cable to
injector pump lever.
Depress tags on outer cable adjusting nut,
remove cable from mounting bracket and move
aside.
24.
25.
If fitted, release hand throttle cable from
mounting bracket and injector pump lever and
move aside.
Disconnect feed pipe and spill return pipe from
injector pump.
17.
Remove starter motor cover and disconnect
battery and fuse box leads.
4
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field