1996 Land Rover Defender Worshop Manual 300 Tdi

REAR SUSPENSION
Refit
NOTE: Do no fully tighten fixings until all
components are in position.
9.
10.
11.
12.
Secure link to frame bracket.
Fit upper link to pivot bracket.
Fit frame bracket to chassis mounting.
Fully tighten fixings to 176 Nm (130 lbf/ft).
SUSPENSION LINK - LOWER
Service repair no - 64.35.02.
Remove
Refit
10.
11.
Fit mounting rubber to lowerlink.
Secure mounting rubber to chassis bracket, but
do not fully tighten locknut.
Fit lower link to axle mounting and secure fixing
to 176 Nm (130 lbf/ft).
Lower vehicle, allow axle to take up static laden
position, and fully tighten link chassis fixing to
1.
2.
Site vehicle on a ramp .
Alternatively, support vehicle on stands under
rear axle.
12.
13.
176
Nm (130 lbf/ft).
3.
4.
Remove lower link rear fixings.
Remove mounting bracket fixings at side
member bracket.
5.
6.
7.
Remove lower link complete.
Remove locknut.
Remove mounting bracket from lower link.
Renew bush
8.
9.
Press out rubber bushes.
Fit bush centrally in housing.
CAUTION: Apply pressure to outer edge of
bush, and not rubber inner.
REPAIR
3
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field