1996 Land Rover Defender Worshop Manual 300 Tdi

76
CHASSIS AND BODY
EXTERIOR HANDLE - REAR SIDE DOOR
Service repair no - 76.58.02
Remove
1.
2.
Remove door trim casing See Door trim casing
.
Peel back sufficient of plastic sheet to gain
access to handle mechanism.
Refit
5.
6.
Insert lifting arm button into lifting channel.
Position regulator so that fixing holes line-up with
holes in mounting panel.
7.
8.
Secure with 4 screws and tighten evenly.
Temporarily fit handle and check that glass can
be raised and lowered smoothly without tight
spots.
9.
Fit plastic sheet.
10.
Fit door trim  See Door trim casing .
3.
4.
Disconnect actuating rod from handle operating
lever.
Remove 2 screws and withdraw handle and
bezels.
Refit
5.
Fit handle to door ensuring that both bezels are
in position - flat faces towards door and secure
with 2 screws.
6.
Connect actuating rod to handle operating lever
and secure with spring clip.
7.
8.
Re-seal plastic sheet.
Fit door trim casing See Door trim casing .
4
REPAIR
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field