REAR AXLE AND FINAL DRIVE
DIFFERENTIAL ASSEMBLY - 110/130
Service repair no - 51.15.07
Overhaul
1.
2.
Drain off differential lubricating oil, and refit plug.
Remove rear axle assembly from vehicle See
Repair, Rear axle
3.
4.
Remove hub driving member fixings.
Withdraw driving member and axle shaft
sufficiently to disengage differential.
Repeat instruction 4 for other axle shaft.
5.
Using axle spreader 18G31C
11.
12.
Fit axle spreader to engage peg holes.
(Spreader 18G131C, Adaptor pegs 18G131F)
Using a spanner, turn adjuster until all free play
between spreader and casing is taken up,
denoted by adjuster becoming stiff to turn.
Check that side members of spreader are clear
of casing.
Stretch casing, rotating adjuster by one flat at a
time, until differential assembly can be levered
out. Do not lever against spreader; use suitable
packing under levers to avoid damage to casing.
6.
7.
8.
9.
Remove fixings and support strip at differential
cover and withdraw cover and joint washer.
Note relationship marking on bearing caps and
axle casing to ensure correct refitting.
Remove fixings and withdraw differential bearing
caps.
Clean out and examine spreader tool pegholes
provided in gear casing face; ensure that holes
are free from dirt and burrs and damage.
Ensure that turnbuckle adjuster is free to turn.
13.
14.
10.
OVERHAUL
1
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)