FUEL SYSTEM
HEATER PLUGS
Service repair no - 19.60.31
Remove
1.
Disconnect battery.
No.1 heater plug - air conditioning models:
2.
3.
Release drive belt from compressor pulley. See
AIR CONDITIONING, Repair, Compressor
drive belt
Remove 4 bolts securing compressor to front
cover, move compressor aside.
NOTE: Feed wire must be connected to
No. 4 heater plug terminal.
No.3 heater plug:
Remove retaining bolt and withdraw breather
valve from rocker cover. Remove and discard ’O’
ring.
4.
No. 3 heater plug:
11.
12.
Lubricate new ’O’ ring with engine oil and fit to
breather valve.
Fit valve to rocker cover, tighten to bolt to 15 Nm
All heater plugs:
(11
lbf/ft).
5.
6.
Remove terminal nut and disconnect wire from
heater plug terminal.
Unscrew heater plug.
No. 1 heater plug - air conditioning models
13.
14.
Position compressor to front cover, fit bolts and
tighten to 25 Nm (18 lbf/ft).
Fit drive belt to compressor pulley and adjust
tension. See AIR CONDITIONING, Repair,
Compressor drive belt
Refit
7.
8.
Clean heater plug and seating.
Coat threads of heater plug with suitable
anti-seize compound operational to a
temperature of 1000° C.
Fit heater plug, tighten to 23 Nm (17 lbf/ft).
Connect wire to heater plug terminal and secure
with nut.
All models:
Reconnect battery.
9.
10.
15.
REPAIR
11
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)