1996 Land Rover Defender Worshop Manual 300 Tdi

FUEL SYSTEM
TURBOCHARGER OIL DRAIN PIPE
Service repair no - 19.42.12
Remove
1.
2.
Disconnect battery.
Remove exhaust front pipe. See MANIFOLD
AND EXHAUST SYSTEM, Repair, Exhaust
front pipe
3.
4.
Unscrew union and disconnect oil drain pipe
from cylinder block.
Remove 2 bolts securing oil drain pipe to
turbocharger.
5.
6.
Remove drain pipe and discard gasket.
Plug connections to prevent ingress of dirt.
Refit
7.
Ensure mating surfaces of oil pipe, turbocharger
and engine block are clean.
8.
Using new gasket, fit oil drain pipe to
turbocharger. Tighten bolts to 25 Nm (18 lbf/ft).
Fit drain pipe to cylinder block and tighten union
connector to 38 Nm (28 lbf/ft).
9.
10.
Fit exhaust front pipe. See MANIFOLD AND
EXHAUST SYSTEM, Repair,  Exhaust front
pipe
11.
12.
Check/top-up engine oil level. See SECTION
10,
Maintenance,  Under bonnet maintenance
Reconnect battery.
REPAIR
15
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field