ENGINE
ENGINE
8. Remove radiator assembly. See COOLING
SYSTEM, Repair, Radiator
Service repair no - 12.41.01
Remove
If air conditioning is fitted the condenser will
have to be removed, compressor pipes and
heater matrix hoses disconnected.
See AIR CONDITIONING, Repair, Condenser
9. Remove rocker cover insulation.
NOTE: A chassis undertray may be fitted
on some vehicle derivatives to conform to
legal requirements. When under chassis
remove and refit procedures are required, it may
be necessary to remove the undertray and/or
integral access panels.
See CHASSIS AND BODY, Repair, Front
undertray or See CHASSIS AND BODY, Repair,
Rear undertray
CAUTION: Seal all exposed pipe ends
against ingress of dirt after disconnection.
1.
2.
Ensure vehicle is level and apply park brake.
Disconnect battery.
NOTE: The vehicle may be fitted with an
alarm and immobilisation system using a
battery backed-up alarm sounder.
See ELECTRICAL, Repair, battery
10.
Remove feed pipe/hose from turbo-charger and
intercooler.
11.
Disconnect heater hoses from cylinder head and
heater rails.
3.
4.
Remove bonnet.
Remove cable ties securing gearbox harness to
breather pipes.
12.
13.
Disconnect electrical feed plug at rear of cylinder
head.
Disconnect heater plug feed wire.
5.
Disconnect harness from diff lock and reverse
light switches.
Manouvre harness into engine bay.
Remove air cleaner. See FUEL SYSTEM,
Repair, Air cleaner
6.
7.
REPAIR
3
Product Specification
Categories | Land Rover, Land Rover Defender |
---|---|
Tags | Land Rover |
Model Year | 1996 |
Download File |
|
Document Type | Workshop Manual |
Language | English |
Product Name | Defender 300 Tdi |
Product Brand | Land Rover |
Document File Type | |
Publisher | landrover.com |
Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
Copyright | Attribution Non-commercial |