30
MANIFOLD AND EXHAUST SYSTEM
INTERMEDIATE PIPE - 90
Service repair no - 30.10.11
Remove
INTERMEDIATE PIPE - 110/130
Service repair no - 30.10.11
Remove
1.
2.
Raise vehicle on ramp.
Release intermediate pipe from front mounting
rubber, see J6243.
1. Raise vehicle on ramp.
2. Release intermediate pipe from mounting
rubber, see J6244.
3.
4.
5.
6.
Remove 2 flange nuts securing intermediate
pipe to tail pipe.
Release intermediate pipe from rear mounting
rubber.
Remove 2 flange nuts securing intermediate
pipe to front pipe.
Release intermediate pipe from front and tail
pipe and remove.
3. Remove 2 flange nuts securing intermediate
pipe to tail pipe.
4. Remove 2 flange nuts securing intermediate
pipe to front pipe.
5. Release intermediate pipe from front and tail
pipe and remove.
Refit
Refit
6. Fit intermediate pipe to front and tail pipes.
7.
Secure intermediate pipe to mounting rubbers.
7.
8.
Fit intermediate pipe to front and tail pipes.
Secure intermediate pipe to front and rear
mounting rubbers.
Secure intermediate pipe to front pipe. Tighten
nuts to 30 Nm (22 lbf/ft).
Secure intermediate pipe to tail pipe. Tighten
nuts to 30 Nm (22 lbf/ft).
Lower vehicle.
8. Secure intermediate pipe to front pipe. Tighten
nuts to 30 Nm (22 lbf/ft).
9. Secure intermediate pipe to tail pipe. Tighten
nuts to 30 Nm (22 lbf/ft).
9.
10.
11.
10. Lower vehicle.
4
REPAIR
| Categories | Land Rover, Land Rover Defender |
|---|---|
| Tags | Land Rover |
| Model Year | 1996 |
| Download File |
|
| Document Type | Workshop Manual |
| Language | English |
| Product Name | Defender 300 Tdi |
| Product Brand | Land Rover |
| Document File Type | |
| Publisher | landrover.com |
| Wikipedia's Page | http://en.wikipedia.org/wiki/Land_Rover |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)