1996 Land Rover Defender Worshop Manual 300 Tdi

REAR AXLE AND FINAL DRIVE
REAR STUB AXLE - 110/130
Service repair no - 64.15.22
Overhaul
1.  Remove hub assembly  See Repair, Rear hub
assembly .
2.
3.
4.
5.
Remove 6 bolts from stub axle to axle casing.
Remove mudshield.
Remove stub axle and joint washer.
Remove rear axle shaft from axle casing.
Renew rear stub axle oil seal
STUB AXLE COMPONENTS
1.
2.
3.
4.
5.
6.
Rear axle shaft
Stub axle to axle casing bolt
Mudshield
Stub axle
Stub axle joint washer
Axle case
6.
Remove and discard oil seal. Lubricate seal and
lip EP90 oil. Using special tool LRT-51-004
(LST138) fit new seal lipside trailing so that seal
is flush with rear face of stub axle.
Refit
7.
Fit new joint washer, stub axle and mudshield.
Tighten bolts to 65 Nm (48 lbf/ft).
Fit rear axle shaft, avoid damaging stub axle
seal.
8.
9.
Refit hub assembly  See Repair, Rear hub
assembly .
OVERHAUL
15
Product Specification
CategoriesLand Rover, Land Rover Defender
Tags
Model Year1996
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 450 pages
Document TypeWorkshop Manual
LanguageEnglish
Product NameDefender 300 Tdi
Product BrandLand Rover
Document File TypePDF
Publisherlandrover.com
Wikipedia's Pagehttp://en.wikipedia.org/wiki/Land_Rover
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)
Submit your review (optional)
(will not be displayed)
12345
* Required Field